I'm trying to use a 7" TFT touch display with the SK-S7G2. I unpluged the LCD flat cable that come with the SK-S7G2. Next, I connect the 7" LCD to the header pins on the kit using the same pin configurations as the shown in the GUIX Hello example for the SK-S7G2. I added 2 additional pin P5_13 and P8_05 for LCD_D16 and LCD_D17 respectively. So far, I could not make it work. The 7" LCD I'm using is 18 bits RGB. I configure the display driver on r_glcd as follow: after execute the debug, the screen display as follow The TCON signals are in the following picture. with D0 = Data enable D1 = HSYNC D2 = DCLK D3 = VSYNC Data enable is not showing any changing stage. Please share your advice. Thanks.
↧