Hello Brian, Please verify with Section 9.3 (of the S7G2 User's Manual) that you're connecting your resonator in the right way and that damping and feedback resistances match the values specified by the crystal manufacturer. Once this is done, in Synergy configurator go to Threads -> HAL/Common -> g_cgc and in the properties select Main Oscillator Clock Source -> "Crystal or Resonator". On the "Clocks" tab in the same configurator, click on "XTAL 24MHz" and enter "12000000" (i.e. new frequency in Hz). PLL Src should be configured as XTAL and scaled using divider/multiplier to achieve 240MHz at the PLL output. Regards
↧