Forum Post: RE: Is there any example for Ethernet 0 interface
(attached project is my current setting) (Please visit the site to view this file)
View ArticleForum Post: RE: Adding a webserver to a project.
Good Morning Ashwin, Ok, please forgive my inexperience here. I hope you and I are talking about two different things. My project is a port from the 63n Micrium rtos to the ThreadX stuff here....
View ArticleForum Post: RE: Generate .hex, .jlink for standalone run
Thanks for the reply. I've tried this, it works, but not for all projects. I have another project which works fine when running from e2Studio (both Debug/Release), but when flashed via. jFlashLite,...
View ArticleForum Post: RE: Intermittent Ethernet (Main Board) S7DK development board
Thanks - this fixed the issue
View ArticleForum Post: RE: Intermittent Ethernet (Main Board) S7DK development board
Thanks - this fixed the issue
View ArticleForum Post: RE: Documenting move from Dev Kit to my own board
I have some output pins whose level must be set before the direction is switched to output and can't find a way to specify this in the pin configuration. The files where this can be done seems all to...
View ArticleForum Post: RE: Adding a webserver to a project.
Hello All, NetX Webserver demo application uses HTML code encoded into C header files, hence the confusion. The webserver (http server) NetX module is highly integrated with other X-ware components,...
View ArticleForum Post: RE: Generate .hex, .jlink for standalone run
LED3 is a bi-colour LED. Green LED of LED3 shows power is applied to the board (+3.3V is being supplied), RED LED of LED3 flashing shows that the JLink OB is not connected by USB to a host PC (i.e....
View ArticleForum Post: Starter Kit SK-S7G2 uart not working
Hi , I tried this code with the s7g2 kit .But its not working any 1 have info whats the problem . Used channel 3 and check on hyperlink terminal using serial port in pc e2 studio Version: 5.0.0.043...
View ArticleForum Post: RE: Starter Kit SK-S7G2 uart not working
Hello, I see few problems with the code. Firstly, there's no loop, so the application will end up in the default handler after hal_entry function returns. Later in the code, the data written has...
View ArticleForum Post: USBX demo question
In the USB Host MSD demo there is this: #define APP_USB_MEM (65536) /** Memory allocated for the USBX driver and file control handle */ static UCHAR mem_usb[APP_USB_MEM]; which is used to...
View ArticleForum Post: Debugger not stopping at breakpoints
Anyone have trouble with the debugger not stopping at some breakpoints? I was having a problem with something that cause me to start debugging my tx_application_define_user() function. But it didn't...
View ArticleForum Post: RE: Adding a webserver to a project.
Karol, You have great, specific advice and I love your replies - thank you for all of them! And the examples that you have provided really help those of us under tight deadlines get stuff done. I...
View ArticleForum Post: RE: Starter Kit SK-S7G2 uart not working
Thanks alot i will check this code hopefully it will work . I also tried with while(1) and also reducing the size of source and destination array but it did not work .
View ArticleForum Post: RE: USBX demo question
Hello, I see your post is referring to my version of the demo, so let me justify: this memory is used for almost everything-USBX. If a class needs to create an internal thread, the thread stack is put...
View ArticleForum Post: RE: Debugger not stopping at breakpoints
By default e2studio is set to use Hardware break points. On the Cortex M4 there are only 6 HW breakpoint available in the FPB unit (and the HW break points can only be set in the first 0.5GB of the...
View ArticleForum Post: RE: Debugger not stopping at breakpoints
Thanks. I'll give that a try, and yes, it's using the Hardware breakpoints. However, even when I hit "Clear All Breakpoints" and only set one, it had the same issue.
View ArticleForum Post: RE: Adding a webserver to a project.
Hi Karol, Thank you for the reply. That has helped. I have been working though most of it in a slight variant of the usb host demo. I have nx telnet server added in. I have had it running. On...
View Article
