Forum Post: RE: Custom board - problems with screen
Hello isaenz, Please make sure that "LINE DETECT" interrupt is enabled in GLCD properties (i.e. g_display/g_display0). Also, "wInicio0" window must exist or else you'll observe black screen and/or hard...
View ArticleForum Post: RE: Custom board - problems with screen
Hello Karol, yes, LINE DETECT is set to priority 3 and wInicio0 exists in our GUIx application. We've found the GUIX hello world application for the BSP1.2.0 and now we're trying to replicate that...
View ArticleForum Post: RE: Custom board - problems with screen
Hello isaenz, You can find Weather Panel application ported to SSP 1.2.0-b.1 in the following post: renesasrulz.com/.../24863 . Semaphore is used for flow control of SPI during LCD initialization on...
View ArticleForum Post: RE: Custom board - problems with screen
This project is build with the SSP 1.2.0-b.1, I have SSP 1.2.0 and I'm having some problems porting it. If I change to the SSP 1.2.0 it doesn't upload correctly, and if I don't change the SSP it occurs...
View ArticleForum Post: Comparing two board configurations
I have a SK-S7G2 with a 32 MB SDRAM and an 800x480 TFT added, and I already have an application that runs perfectly on it. Then I created a BSP to ease creation of future projects on the same board but...
View ArticleForum Post: RE: Comparing two board configurations
Hi, You may compare synergy_gen/pin_data.c files from both projects using simple diff tool like WinMerge or Meld. Regards, adboc
View ArticleForum Post: RE: Custom board - problems with screen
Hello isaenz, I'm attaching a 1.2.0 version of the Weather Panel I migrated in my own time. The changes between 1.2.0-b.1 and Gold were minimal. To upload this here, I had to delete GUIX...
View ArticleForum Post: RE: Comparing two board configurations
Now that I have found the differences between the pin_data.c files in both projects, a strange problem is happening: in my new project created using my new BSP, if I change a pin behaviour in...
View ArticleForum Post: RE: Comparing two board configurations
Hello Laboratori, Seems like you forgot to mark .pincfg as "template" when creating your BSP. Failing to do so will cause your pincfg file to be re-extracted on every build if it's been modified. Steps...
View ArticleForum Post: RE: GUIX: How to reduce RAM consumption?
Karol, Any changes to this under 1.20? In a 1.1.3 project I had it set as shown above and it's been working great. I'm doing the Hello World project for 1.2 and out of the box it's fine. If I change...
View ArticleForum Post: RE: Selective SRAM initialization with MMF flash update on DK-S3A7
Following up on this, I've been experimenting with defining sections and locating variables in them. The variables are being placed in the right section, but I am curious how their placement order is...
View ArticleForum Post: RE: GUIX: How to reduce RAM consumption?
Karol, Figured it out. You really do need to get rid of all the names of buffers that aren't being used. Bill
View ArticleForum Post: Configure RS232 and RS485 in S7G2-DK
HI, I want to connect a printer over RS232 on S7G2-DK kit. 1)How to configure/enable RS232 in SSP/e2studio? Any sample application available for the same? 2)Any printer library (Set the Font...
View ArticleForum Post: RE: Configure RS232 and RS485 in S7G2-DK
Hi Known, There are UART Driver on r_sci_uart or Communications Framework on sf_uart_comms in SSP. Unfortunately there is no example application using UART. If you're using S7G2-DK board, you may be...
View ArticleForum Post: RE: Comparing two board configurations
Karol, marking .pincfg it as a "template" also doesn't work. Any other hint, please?
View ArticleForum Post: RE: Comparing two board configurations
I just found that marking just one of the changed pins as "locked" (see image) generates a pin_data.c with *all* the changes present, and unlocking it generates a wrong pin_data.c with the pin config...
View ArticleForum Post: RE: Comparing two board configurations
No way. Locking a pin generates a correct pin_data.c when pressing "Generate Project Content", but as soon as I build the project, this correct pin_data.c is overwritten with the one based solely on...
View ArticleForum Post: RE: Selective SRAM initialization with MMF flash update on DK-S3A7
Hello, Unfortunately with GCC it's not possible to accurately determine the order in which the variables are included, especially when globally-visible symbol is emitted for them (i.e. they're global...
View ArticleForum Post: RE: Comparing two board configurations
Hi, In your project you can rename a .pincfg file and select it Pins tab. This should prevent a pin configuration from being overwritten. Regards, adboc
View Article