Forum Post: RE: Comparing two board configurations
Thanks adboc, this will preserve a given .pincfg file, but I think every time I want to make a new change to my configuration.xml file (for example, adding new functionality to previously unused pins...
View ArticleForum Post: RE: Comparing two board configurations
Maybe configuration.xml file isn't marked as "template"? Regards, adboc
View ArticleForum Post: RE: Comparing two board configurations
I followed the instructions in the document "r11an0071eu0110-synergy-bsp-upgrade-sspv120.pdf", and in this step-by-step on creating a BSP, configuration.xml isn't even included (see figure 2.12,...
View ArticleForum Post: RE: Configure RS232 and RS485 in S7G2-DK
Hi adboc, Thanks for the reply. Will try with that. Regards.
View ArticleForum Post: RE: Custom board - problems with screen
Thanks Karol, we've made some progress. Now we're able to obtain output signals for DataEnable, VSync and HSync, but we do not see any output for the data. Could we be missing any initialization or...
View ArticleForum Post: RE: Custom board - problems with screen
Hello isaenz, Your pin config is set for RGB666 while the GLCD peripheral is outputting RGB565. I can also see that you enabled both layers - for GUIX only background layer should be enabled (you'll...
View ArticleForum Post: Using the DK-S124 to control LED brightness
I came across an older demo that's in the process of being updated for SSP 1.2, located here (warning, the SSP 1.1.0 version doesn't fit but the 1.2 version is in the process of being published at the...
View ArticleForum Post: RE: Custom board - problems with screen
Hi isaenz, The BSP for MCU is located under ssp/bsp/mcu/ . For S7G2, there is bsp_clocks.c file, where clock for SDRAM is being enabled. Regards, adboc
View ArticleForum Post: Building a user BSP
To build a new user BSP using the brand new tools provided by the latest e2studio/SSP1.2.0 I followed the instructions in the document "r11an0071eu0110-synergy-bsp-upgrade-sspv120.pdf". On another...
View ArticleForum Post: Trouble with FileX in SSP 1.2.0
I recently upgraded my software on S7G2-DK from SSP 1.1.3 to SSP 1.2.0, and I'm still having trouble with FileX on sdmmc. (Whereas with old SSP 1.1.3 all works fine). Issue description: High level...
View ArticleForum Post: RE: Custom board - problems with screen
Hi adboc, I see that file, but taking a look at the post Karol mentioned ( http://renesasrulz.com/synergy/f/synergy---forum/7774/guix-ssp-1-1-3--1-2-0b/24501#24501 ), there's no bsp_sdram_init()...
View ArticleForum Post: RE: Trouble with FileX in SSP 1.2.0
HI Yvelain, Can you check if changing the transfer driver to DMA solves this issue? Regards, adboc
View ArticleForum Post: RE: Custom board - problems with screen
Hello isaenz, When using custom BSP, the bare minimum required to get your project running is to provide a file with g_bsp_leds structure and bsp.h file that provides an external linkage for it....
View ArticleForum Post: RE: Custom board - problems with screen
Hi isaenz, Sorry, I forgot that SK-S7G2 doesn't have SDRAM onboard. As Karol said, you may find it e.g. for DK-S7G2 BSP. Regards, adboc
View ArticleForum Post: RE: Trouble with FileX in SSP 1.2.0
Thanks for you quick answer but I checked this proposal, no improvement, same status as before :(
View ArticleForum Post: RE: Building a user BSP
Had the same problem with 1.2.0-beta, could not find out which of all the fields to fill needed a fixed name or version string and which are free choice or could be left blank. Then it was not clear to...
View ArticleForum Post: RE: Build only changed files?
Hi adboc or Karol, Any ideas on what I can try to stop having all of my files rebuilt on every Build when I add a post-build step (see prior posts)? Thanks, Jeff
View ArticleForum Post: RE: Building a user BSP
Hello Laboratori, In the previous thread we asked if configuration.xml was included to determine why was it being overwritten on each build. Naturally, the right way to create the BSP doesn't involve...
View ArticleForum Post: RE: Configure RS232 and RS485 in S7G2-DK
Avoid using SSP 1.2.0-beta for RS485: There is a bug in the uart driver that triggers the callback on send complete two bytes too early, every second time you send, so you can't use it for send/receive...
View ArticleForum Post: RE: Trouble with FileX in SSP 1.2.0
Hi Yvelain, Can you check another SD card? I tried to reproduce the issue, but my project works as expected with both DTC and DMA. How much memory has the card? Is it SDHC or SDXC? How did you...
View Article